Precision hand grinder

X-axis 350/618：

355

Y-axis 350/618：

150

Z-axis 350/618：

350

YG-450 参数表

(YG-450 Parameter table)

规格(Specification) YG-450

工作台尺寸 ( Worktable) 150*457mm(6*18*)

最大研磨长度 (Maximum grinding length) 475mm(18-3/4")

最大研磨宽度(况 aximum grinding width) 160mm ( 6-1/3")

主轴至工作台面距离 (Spindle to table distance)

350-400 JH ] H (13. 8*15. 7") 定制最高可达 430mm ( 350-

400mm(13. 8*15. 7' )customization up to 430mm)

左右手动进给 (Left and right manual feed) 485mm (19")

前后手动进给(况 anual feed forward and backward) 180mm ( 7")

前后手动每刻度进给 (Manual feed per tick) 0. 02mm ( 0. 001")

前后手动每转进给 (Manual feed per revolution) 5mm (0. 2'') 或 3mm (0.1°) (5mm (0. 2") or3mm (0.1"))

升降手轮每刻度进给 (The lifting handwheel feed every tick)0. 005mm (0. 0002")

升降手轮每转进给 (Lift handwheel per feed) 1mm ( 0. 05")

砂轮尺寸(直径*宽度*孔径) (Wheel size (diameter Xwidth X aperture)180x16x32mm ( 7x2/3xl-l/4 a )

主轴速度 ( Spindle speed) 60Hz/50Hz-3600/3000rpm

主轴马达 (Spindle motor) 1.5/2Hp

净重 (net weight) 850kgs

装箱尺寸 (Packing size) 1550x1150x1980mm ( 55x45x78")

苏州至全机电设备有限公司

YG-614G 参数表

(YG-614G Parameter table)

☆ z 轴增加丝杠螺母固定好.稳定性好确保精度☆ Z axis to increase screw nut fixed

good, good stability to ensure accuracy

☆ 4 条经络骨结构刚性好，不易变形☆ The four meridians are rigid and do

not deform eas iIy

☆吸尘 ☆ aspiration

科学化的吸尘设计，吸尘口倾斜度为 45 度，并且可上

下调整，确保最佳的吸尘能力

Scientific dust absorption design, the inclined level of the suction mouth is 45 degrees, and can be ad justed up and down to ensure the best dust absorption capacity

☆防尘 ☆ dust

直接铸件防尘，产密的防尘设计是其他易变形塑胶制品无法比凝的。防尘的优劣直接关系到机床的精度和机床的寿命

Direct casting dust - proof, strict dust - proof design is other flexible plastic products can not be more than coagulation. The quality of dustproof is directly related to the precision of the machine tool and the life of the machine tool

☆铸件☆ The casting

壁厚 15nm 以上重达 850 公斤(较其他同型磨床增加了 30%)的优良铸件，大大的提高了机床的稳定性，确保机床的整体刚性

Excellent casting with wall thickness of 15mm or more and weight of 850 kg (30% more than other similar grinding machines) greatly improves the stability of the machine tool and ensures the overall rigidity of the machine too I

规格(Specification) YG-614G

工作台尺寸 (Worktable) 150x355mm ( 6xl4 a )

最大研磨长度 (Maximum grinding length) 375mm(13-3/4*)

最大研磨宽度 (Maximum grinding width) 160mm ( 6-1/3 a 0 )

主轴至工作台面距离 (Spindle to table distance) 350-400mm ( 6x12 s )

左右手动进给 (Left and right manual feed) 380mm(15 a )

前后手动进给 ( Manual feed forward and backward) 180mm ( 7")

前后手动每刻度进给 (Manual feed per tick) 0. 02mm ( 0. 001")

前后手动每转进给 (Manual feed per revolution) 5mm ( 0. 2") 或 3mm ( 0.1") ( 5]nm ( 0. 2°) or 3mm ( 0.1°))

升降手轮每刻度进给 (The lifting handwheel feeds every tick)0. 005mm ( 0. 0002” )

升降手轮每转进给 (Li ft handwheel per feed) 1mm ( 0. 05")

砂轮尺寸(直径*宽度*孔径) (Wheel size (diameter Xwidth X aperture)180mm ( 7x2/3xl-l/4 B )

主轴速度 ( Spindle speed) 60Hz/50Hz-3600/3000rpm

主轴马达 ( Spindle motor) 1.5/2Hp

净重 (net weight) 800kgs

装箱尺寸 ( Packing size) 1450x1150x1980mm ( 52x45x78 s )

YG-618G 参数表

(YG-618G Parameter table)

☆ z 轴增加丝杠螺母固定好，稳定性好确保精度☆ Z axis to increase screw nut fixed

good, good stability to ensure accuracy

☆ 4 条经络骨结构刚性好，不易变形☆ The four meridians are rigid and donot deform eas iIy

☆吸尘☆ aspiration

科学化的吸尘设计，吸尘口倾斜度为 45 度，并且可上下调整，确保最佳的吸尘能力

Scientific dust absorption design, the inclined level of the suction mouth is 45 degrees, and can be ad justed up and down to ensure the best dust absorption capacity

☆防尘☆ dust

直接铸件防尘，严容的防尘设计是其他易变形型胶制品无法比凝的。防尘的优劣直接关系到机床的精度和机床的寿命

Direct casting dust - proof, strict dust - proof design is other flexible plastic products can not be more than coagulation. The quality of dustproof is directly related to the precision of the machine tool and the life of the machine tool

☆铸件☆ The casting

壁厚 15mm 以上重达 850 公斤(较其他同型磨床增加了 30%)的优良铸件，大大的提高了机床的稳定性，确保机床的整体刚性

Excellent casting with wall thickness of 15mm or more and weight of 850 kg (30% more than other similar grinding machines) greatly improves the stability of the machine tool and ensures the overall rigidity of the machine too I

规格(Specification) YG-618G

工作台尺寸 ( Worktable) 150x457mm ( 6x18*)

最大研磨长度 (Haximum grinding length) 475mm(13-3/4")

最大研磨宽度 (Haximum grinding width) 160mm ( 6T/3")

主轴至工作台面距离 (Spindle t 。 table distance) 350-400mm (13. 8x15. 7")

左右手动进给 (Left and right manual feed) 480mm (19")

前后手动进给 ( Hanu&l feed forward and backward) 180mm ( 7")

前后手动每刻度进给 (Manual feed per tick) 0. 02mm ( 0. 001")

前后手动每转进给 (Manual feed per revolution) 5mm ( 0. 2") 或 3mm ( 0.1") ( 5mm ( 0. 2°) or 3mm ( 0.1"))

升降手轮每刻度进给 (The lifting handwheel feedsevery tick)0. 005mm (0. 0002")

升降手轮每转进给 (Lift handwheel per feed) 1mm ( 0. 05")

砂轮尺寸(直径*宽度*孔径) (Wheel size (diameter Xwidth X aperture)180x16x32mm ( 7x2/3xl-l/4 a )

主轴速度 ( Spindle speed) 60Hz/50Hz-3600/3000rpm

主轴马达 ( Spindle motor) 1.5/2Hp

净重 (net weight) 850kgs

装箱尺寸 (Packing size) 1550x1150x1980mm ( 55x45x78°)

YG-618 参数表

(YG-618 Parameter table)

规格(Specification) YG-618

工作台尺寸 ( Worktable) 150x457mm ( 6x18°)

最大研磨长度(况 aximum grinding length) 475mm(18-3/4")

最大研磨宽度(况 aximum grinding width) 160mm ( 6-1/3")

主轴至工作台面距离 (Spindle to table distance) 350-400mm(13. 8x15. 7")

左右手动进给 (Left and right manual feed) 485mm (19°)

前后手动进给(况 anual feed forward and backward) 180mm (")

前后手动每刻度进给 (Manual feed per tick) 0. 02mm ( 0. 001")

前后手动每转进给 (Manual feed per revolution) 5mm ( 0. 2")

升降手轮每刻度进给 (The lifting handwheel feeds every tick)0. 005mm (0. 0002*)

升降手轮每转进给 (Lift handwheel per feed) 1mm ( 0. 05")

砂轮尺寸(直径*宽度*孔径) (Wheel size (diameter Xwidth X aperture)180x16x32mm ( 7x2/3xl-l/4°)

主轴速度 (Spindle speed) 60Hz/50Hz-3600/3000rpm

主轴马达 (Spindle motor) 1. 5/2Hp

净重 (net weight) 750kgs

装箱尺寸 (Packing size) 1550x1150x1980mm ( 55x45x78' ')

YG-250G 参数表

(YG-250G Parameter table)

☆轨道为夜轨，瑜保机床精度☆ The track i s hard rail to ensurethe accuracy of machine too 

☆主轴为一体式，确保机床精度和稳定性☆ The main shaft i s one-piece, which ensures the precision and stability of the machine too 

☆方型主轴，可做重切削☆ Square spindle for heavy cutt i ng

规格(Specification) YG-250G

工作台尺寸 (Worktable) 200*500]HJH ( 8*20°)

最大研磨长度(况 aximum grinding length) 510mm ( 20")

最大研磨宽度 (Haximum grinding width) 230mm ( 9")

主轴至工作台面距离 (Spindle to table distance) 400-430mm(15.7*17")

左右手动进给 (Left and right manual feed) 485mm (19")

前后手动进给 ( Manual feed forward and backward) 180mm ( 7")

前后手动每刻度进给 (Manual feed per tick) 0. 02mm ( 0. 001")

前后手动每转进给 (Manual feed per revolution) 5mm ( 0. 2")

升降手轮每刻度进给 (The lifting handwheel feeds every tick)0. 005mm ( 0. 0002")

升降手轮每转进给 (Lift handwheel per feed) lmm ( 0. 05")

砂轮尺寸(直径*宽度*孔径) (Wheel size (diameter Xwidth X aperture)180*16*32mm ( 7*2/3*l-l/4°)

主轴速度 ( Spindle speed) 60Hz/50Hz-3600/3000rpm

主轴马达 (Spindle motor) 2Hp

净重 (net weight) 900kgs

装箱尺寸 (Packing size) 1550*1150*1980mm ( 55*45*78°)

YG-618GH 参数表

(YG-618GH Parameter table)

技术参数 ( TECHNICAL PARAMETERS) YG-618GH

主要规格 (MainSpecifications)

工作台尺寸 (Worktable) 150*457mm ( 6*18")

最大研磨长度 (Maximum grinding length) 475mm(18-3/4'

最大研磨宽度 (Hazimum grinding width) 160mm ( 6-1/3*')

主轴至工作台面距离 (Spindle to table distance)350-400mm(13. 8*15. 7") 

定制最高可达 430mm ( 350-400mm(13. 8*15. 7 tf ) customization up t 。 430mm)

左右进给 (about Feed)

自动进给 (Automatic feed)

工作台速度 (5-23jn/min) (Table speed (5-23m/jnin))

手动进给 (Manual feed) 485mm (19°)

前后进给 (Before feeding)

前后手动进给(况 anual feed forward and backward) 180mm ( 7")

前后手动每刻度进给 (Manual feed per tick) 0. 02mm ( 0. 001")

前后手动每转进给 (Manual feed per revolution) 5mm ( 0. 2") 或 3mm ( 0.1°) (5mm ( 0. 2") or3mm ( 0.1"))

升降进给(Lifting feed)

升降手轮每刻度进给 (The lifting handwheel feeds every tick)0. 005mm (0. 0002")

升降手轮每转进给 (Li ft handwheel per feed) 1mm ( 0. 05")

砂轮 ( Grinding wheel)

砂轮尺寸(直径*宽度*孔径) (Wheel size (diameterX width X aperture)180*16*32mm ( 7*2/3*l-l/4 w )

主轴速度 ( Spindle speed) 60Hz/50Hz-3600/3000rpm

马达 (Motor)

主轴马达 ( Spindle motor) 1. 5/2Hp

油压马达 (Oil pressure motor) 1. OHp

净重 (net weight) 850kgs

装箱尺寸 ( Packing size) 1550*1150*1980mm ( 55*45*78")

YG-200Als 参数表

(YG-200AIS Parameter table)

技术参数 ( TECHNICAL PARAMETERS) 单位 YG-200AIS

加工能力(Processing capacity)

工作台面积 (Table size) mm 350*160

左右最大移动动量 (Maximum grinding length) mm 380

前后最大移动动量 (Maxiinum grinding width) mm 200

工作台面至主轴中心最大距离 ( distance spindle to table)mm 445

工作台最大承受重量(含磁盘) (Maximum table bear the weight(including disk)kgs 100

工作台(Table)

工作台 T 型槽 (T-slot table) mm*N 14*1

工作台速度 ( table speed) m/min 5-13

前后手轮进刀 ( Front and rear handwheel feed)

—格 (A grid) mm 0. 02

—圈 (Lap) mm 4

前后自动进给 (Front and rear automatic feed) mm 0. 1-8

前后快速移动 (Front and rearfast-moving)50Hz mm 820/60Hz mm 950

砂轮(Grindingwheel)

砂轮尺寸 (wheel) mm 200*(6-20)*31. 75

主轴转速 ( Spondle speed)50Hz R. PM 2850/60Hz R. PM 3420

上下结构(The vertical structure)

最大移动量 ( The maxmum amount of movement) mm 980

上下手轮进刀 (On the handwheel infeed)

—格 (A grid) mm 0. 002

—回转 ( A rotary) mm 0. 2

自动进给量 (Automatic feed rate) mm 0. 002-0. 04

上下'快速移动量 (Fast moving up and down volume) mm/min 180

马达(Motor)

主轴马达 ( spindle motor) HP 2*2

上下驱动马达 (Vertical drive motor) HP 伺服 400w (Servo400w)

油压马达 (Hydraulic motor) HP 1*4

吸尘马达 ( Vacuum motor) HP

冲水马达 (Motor flush) HP 1/8*2

前后驱动马达 (Backward driviing motor) HP 步进 4N. M (tep4M 』)

尺寸(Packing size)

净重 (nrt weight)kg 890

机械高度 (Machine height) mm 1645

外形尺寸 (Dimensions) mm 1610*1120

YG-250AHD 参数表

(YG-250AHD Parameter table)

☆轨道为夜轨，瑜保机床精度☆ The track is hard rail to ensure the accuracy of machine too 

☆三轴自动☆ Three axis automatically

☆方里主轴，可做重切削☆ Square spindle for heavy cutting

技术参数 ( TECHNICAL PARAMETERS) 单位 YG-250AHD

加工能力(Processing capacity)

工作台面积 (Table size) mm 460*200

左右最大移动动量 (Maximum grinding length) mm 540

前后最大移动动量 (Maximum grinding width) mm 240

工作台面至主轴中心最大距离 ( distance spindle to table)mm 475

工作台最大承受重量(含磁盘) (Maximum table bear the weight(including disk)kgs 150

工作台(Table)

工作台 T 型槽 (T-slot table) ]nm*N 14*1

工作台速度 ( table speed) m/min 5-13

前后手轮进刀 ( Front and rear handwheel feed)

—格 (A grid)

mm 0. 02

—圈 (Lap) mm 4

前后自动进给 ( Front and rear automatic feed) mm 0. 1-8

前后快速移动 (Front and rearfast-moving)50Hz mm 820/60Hz mm 950

砂轮(Grindingwheel)

砂轮尺寸 (wheel) mm 200*(6-20)*31. 75

主轴转速 ( Spondle speed)50Hz R. pm 2850/60Hz R. pm 3420

上下结构(The vertical structure)

最大移动量 ( The maxmum amount of movement) mm

上下手轮进刀 (On the handwheel infeed)

—格 (A grid)

mm 0. 01/0. 01/0. 01/0. 002

—回转 (A rotary) mm 2/2/2/0.2

自动进给量 ( Autoniatic feed rate) mm 0. 02-0. 04

上下快速移动量 (Fast moving up and down volume) mm/min 230/180

马达(Motor)

主轴马达 (spindle motor) HP 2*2

上下驱动马达 (Vertical drive motor) HP 90w/ 步进 6N. 从伺服 400w

油压马达 (Hydraulic motor) HP 1*4

冲水马达 (Motor flush) HP 1/2*2

前后驱动马达 (Backward driviing motor) HP 1/8*2

尺寸(Packing size)

机械高度 (Machine height) HP 60w/60w/ 步进 6N. M

占地面积 ( Covers an area of)kg 1300

净重 (nrt weight) mm 1775

毛重 (Cross weight) mm 1800*1400

YG-306AHD 参数表

(YG-306AHD Parameter table)

☆轨道为硬轨，确保机床精度☆ The track is hard rail to ensure the accuracy of machine too 

☆三轴自动☆ Three axis automatically

☆方型主轴，可做重切削☆ Square spindle for heavy cutting

技术参数 ( TECHNICAL PARAMETERS) 单位(unit) YG-306AHD

加工能力(Processing capacity)

工作台面积 (Table size) mm 600*300

左右最大移动动量 (Maximum grinding length) mm 660

前后最大移动动量 (Maxijnum grinding width) mm 340

工作台面至主轴中心最大距离 ( distance spindle to table)mm 540

工作台最大承受重量(含磁盘) (Maximum table bear the weight(including disk)kgs 420

工作台(Table)

工作台 T 型槽 (T-slot table) mm*N 14*1

工作台速度 ( table speed) m/min 5-25

前后手轮进刀 ( Front and rear

handwheel feed)

—格 (A grid) mm 0. 02

—圈 (Lap) mm 5

前后自动进给 ( Front and rear automatic feed) mm 0. 1-10

前后快速移动 (Front and rearfast-moving)50Hz mm 790/60Hz mm 950

砂轮(Grinding wheel)

砂轮尺寸 (wheel) mm 350*40*127

主轴转速 ( Spondle speed)50Hz R. pm 1450/60Hz R. pm 1740

上下结构(The vertical structure)

最大移动量 (The mazmum amount of movement) mm 380

上下手轮进刀 (On the handwheel infeed)

—格 (A grid) mm 0. 002

—回转 ( A rotary) mm 0. 5/0. 2/0. 2

自动进给蚩 ( Automatic feed rate) mm 0. 002-0. 04/0. 002-0. 04

上下快速移动量 (Fast moving up and down volume) mm/min 230/180/180

马达(Motor)

主轴马达 ( spindle motor) HP 5*4

上下驱动马达 (Vertical drive motor) HP 90W/ 步进 6N. M 伺服 400W

油压马达 (Hydraulic motor) HP 2*4

冲水马达 (Rotor flush)Hp

前后驱动马达 (Backward driviing motor) HP 1/8*2

净重 (nrt weight) mm 1860

YG-84AHD 参数表

(YG-84AHD Parameter table)

☆轨道为夜轨，瑜保机床精度☆ The track is hard rail to ensure the accuracy of machine too

☆三轴自动☆ Three axis automatically

☆方型主轴，可做重切削☆ Square spindle for heavy cutting

技术参数 ( TECHNICAL PARAMETERS) 单位(unit) YG-84AHD

加工能力(Processing capacity)

工作台面积 (Table size) mm 800X400

左右最大移动动量 (Maximum grinding length) mm 920

前后最大移动动量 CMaxijnum grinding width) mm 450

工作台面至主轴中心最大距离 ( distance spindle totable)mm 580

工作台最大承受重量(含磁盘) (Maximum table bear the weight(including disk)kgs 700

工作台(Table)

工作台 T 型槽 (T-slot table) mm*N 14x3

工作台速度 (table speed) m/min 5-25

前后手轮进刀 (Front and rear

handwheel feed)

—格 (A grid) mm 0. 02

—圈 (Lap) mm 5

前后自动进给 ( Front and rear automatic feed) mm 0. 1-10

前后快速移动 (Front and rearfast-moving)50Hz mm 990/60Hz mm 1190

砂轮(Grindingwheel)

砂轮尺寸 (wheel) mm 0355x20-40x4*127

主轴转速 ( Spondle speed)/50Hz R. pm 145060Hz R. pm 3420

上下结构(The vertical structure)

最大移动量 ( The maxmum amount of movement) mm

上下手轮进刀 (On the handwheel infeed)

—格 (A grid) mm 0. 001

—回转 (A rotary)mm 0. 5

自动进给量 ( Automatic feed rate) mm 0. 005-0. 025

上下快速移动量 (Fast moving up and down volume) mm/min 230

马达(Motor)

主轴马达 (spindle motor) HP 7. 5

上下驱动马达 (Vertical drive motor) HP SOW

油压马达 (Hydraulic motor) HP 3

冲水马达 (Rotor flush) HP 1/4

前后驱动马达 (Backward driviing motor) HP SOW

尺寸(Packing size)

机械高度 (Machine hei ght) mm 1880

占地面积 ( Covers an area of) mm 3600x2750

净重 (nrt weight)Kg2800

毛重 (Cross weight)Kg3000

YG-7132AHD—- 左右、前后自动，上下自动进给精密平面磨床 参数表

(YG-7132AHD-- Right, left and right, up and down to the precision

surface grinder Parameter table)

Machine tool introduction:

FGH-7132AHD surface grinder is a surface grinder suitable for precision machining. And it has the functions of Z-axis automatic feed, Y-axis stepless speed regulation and so on. The front main base and the rear main base of the equipment adopt the technology

Mature and stable T-shaped splicing structure, column movement mode, the worktable and the sliding frame move independently and relative to each other. The left and right reciprocating motion of the worktable adopts flow pressure control, and the front and rear movement of the column adopts stepping.

The motor drives the ball screw through the belt, and the up and down movement of the grinding head adopts the stepper motor to drive the upper and lower screws through the worm screw.

This machine adopts PLC control system, which can complete the automatic grinding of plane or grooving under the condition of one-time installation of workpiece, and has the functions of automatic grinding wheel feeding and adjustment of magnetic force.

Main technical specifications and parameters:

技术参数 ( TECHNICAL PARAMETERS) 单位(unit) YG-7132AHD

加工能力(Processing capacity)

工作台面积 (Table size) mm 1000*400

左右最大移动动量 (Maximum grinding length) mm 1100

前后最大移动动量 (Haximun grinding width) mm 440

工作台面至主轴中心最大距离 ( distance spindle to table) mm 580

工作台最大承受重量 (Maximum table bear the weight) kg 600

工作台(Table)

工作台 T 型槽 (T-slot table) mm*N 18*2

工作台速度 (table speed) jn/min 5-28

前后结构(Structure before and after)

前后手轮进刀 ( Front and rear handwheel feed)

—格 (A grid)mm 0. 02

—圈 (Lap) mm 5

前后自动进给 ( Front and rear automatic feed) mm 0. 1-15

前后快速移动 (Back and forth) 50Hz mm 790

砂轮(Grinding wheel)

砂轮尺寸 (wheel) mm 400*40*127

主轴转速 (Spindle speed) 50Hz R. p. m 1450

上下结构(The vertical structure)

上下手轮进刀 (Upper and lower hand wheel feed)

—格 (A grid)mm 0. 002

—回转 (A rotary) mm 0. 2

自动进给量 (Automatic feed) mm 0. 005-0. 04

上下快速移动量 (Fast moving up and down volume) jn/min 230

最大移动量 (Maximum movement) mm 430

马达(Motor)

主轴马达 (spindle motor) KW 5. 5

上下步进马达 (Up and down step motors) N.M 步进 6N. H

油压马达 (Hydraulic motor) KW 2. 2

冲水马达 (Rotor flush) KW 0. 12

前后步进马达 (Front and rear stepping motors) N.M 步进 6N. M

尺寸(Packing size)

机械高度 (Machine hei ght) mm 2000

占地面积 ( Covers an area of) mm 3500*2000

净重 (nrt weight) Kg 3700

毛重 (Cross weight) Kg 4800