The1year
Silicone rubber hose
flexible metal hose
Rubber sealing articles
Silicone Heater Hose
PVC Manchettes tubes
PTFE Wire Braided Hose
Mortar spraying machine
High-pressure hose assembly
1、 Product structure:
The structure of the steel wire braided rubber hose is composed of the inner rubber layer of the liquid-resistant synthetic rubber, the middle rubber layer, the I or II or III steel wire braided reinforcement layer, and the outer rubber layer of the weather-resistant synthetic rubber.
2、 Product use:
Steel wire reinforced hydraulic hose is mainly used for mine hydraulic support and oil field exploitation, and is applicable to the transportation of petroleum dam se (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) engineering construction, lifting and transportation, liquid metallurgy forging with certain pressure and temperature in mechanical equipment, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools, and mechanization of various industrial departments The automatic hydraulic system dam transports liquid (such as emulsion, oil-water emulsion, water), gas, etc. and liquid.
3、 Operating temperature:
Oil: - 40 ℃ -+100 ℃, air: - 30 ℃ -+50 ℃, water: below+80 ℃. If the temperature is higher than 80 ℃, please use our special products.
4、 Product features:
1. The rubber hose is made of special synthetic rubber with excellent oil resistance, heat resistance and aging resistance.
2. The rubber hose has high pressure and excellent pulse performance.
3. The tube body is tightly combined, soft to use, and small compression deformation.
4. The rubber hose has excellent bending and fatigue resistance.
5. The length of steel wire braided hose is large, and the maximum length can reach tens of meters, or even more than 100 meters.
一层钢丝织胶管技术参数
| 软件管理规范 | 内径 | 钢丝层直线 | 外径 | 工作压力 | 测试压力 | 爆破压力 | 最小弯曲半径 | 参考重量 | |||
海洋保护区 | 气压 | 兆帕 | 气压 | 兆帕 | 气压 | ||||||
1-5-21 | 4.5-5.5 | 9.5±0.6 | 14±0.8 | 21 | 3043 | 31.5 | 4564 | 63 | 9129 | 90后 | 0.25 |
1-6-20 | 5.5-6.5 | 11.7±0.6 | 16±0.8 | 20 | 2898 | 30 | 4347 | 60 | 8694 | 100 | 0.34 |
1-8-17.5 | 7.5-8.5 | 13.7±0.6 | 18±0.8 | 18 | 2536 | 27 | 3804 | 54 | 7607 | 115 | 0.41 |
1-10-16 | 10±0.5 | 15.7±0.6 | 20±0.8 | 16 | 2318 | 24 | 3478 | 48岁 | 6955 | 130 | 0.47 |
1-13-14 | 13±0.5 | 19.7±0.6 | 24±1.0 | 14 | 2028年 | 21 | 3043 | 42 | 6086 | 180 | 0.70 |
1-16-12 | 16±0.5 | 22.7±0.8 | 27±1.0 | 12 | 1739 | 18 | 2608 | 36 | 5216 | 205 | 0.84 |
1-19-10 | 19±0.5 | 25.7±0.8 | 30±1.0 | 10 | 1449 | 15 | 2174 | 30 | 4347 | 240 | 0.95 |
1-22-9 | 22±0.5 | 28.7±0.8 | 33±1.0 | 9 | 1304 | 13.5 | 1956年 | 27 | 3912 | 280 | 1.09 |
1-25-8 | 25±0.5 | 32.2±0.8 | 37±1.0 | 8个 | 1159 | 12 | 1739 | 24 | 3478 | 300 | 1.38 |
1-32-6 | 32±0.5 | 39.2±0.8 | 44±1.2 | 6个 | 869 | 9 | 1304 | 18 | 2608 | 420 | 1.80 |
1-38-5 | 38±0.7 | 45.2±0.8 | 50±1.2 | 5个 | 725 | 7.5 | 1087 | 15 | 2174 | 500 | 1.38 |
1-51-4 | 51±1.0 | 58.2±0.8 | 63±1.5 | 4个 | 579 | 6个 | 8694 | 12 | 1739 | 630 | 1.80 |
二层钢丝编织胶管技术参数
软件管理规范 | 内径 | 钢丝层直线 | 外径 | 工作压力 | 试验压力 | 爆破压力 | 最小弯曲半径 | 参考重量 | |||
海洋保护区 | 气压 | 兆帕 | 气压 | 兆帕 | 气压 | ||||||
2-5-60 | 5±0.5 | 11.2±0.6 | 15±0.8 | 60 | 8694 | 90后 | 13041 | 150 | 21735 | 90后 | 0.40 |
2-6-60 | 6±0.5 | 13.5±0.6 | 18±0.8 | 60 | 8694 | 90后 | 13041 | 150 | 21735 | 100 | 0.45 |
2-8-50 | 8±0.5 | 15.5±0.6 | 20±0.8 | 50 | 7245 | 75 | 10868 | 125 | 18113 | 115 | 0.62 |
2-10-53 | 10±0.5 | 16.5±0.6 | 24±0.8 | 53 | 7680 | 79.5 | 11520 | 132 | 19127 | 130 | 0.71 |
2-13-30 | 13±0.5 | 21.5±0.8 | 26±1.0 | 30 | 4347 | 45 | 6521 | 90后 | 13041 | 180 | 0.93 |
2-16-34 | 16±0.5 | 24.5±0.8 | 30±1.0 | 34 | 4926 | 51 | 7390 | 85 | 12317 | 205 | 1.23 |
2-19-34 | 19±0.5 | 27.5±0.8 | 32±1.0 | 34 | 4926 | 51 | 7390 | 85 | 12317 | 240 | 1.38 |
2-22-16 | 22±0.5 | 30.5±0.8 | 35±1.0 | 16 | 2318 | 24 | 3478 | 48岁 | 6955 | 280 | 1.54 |
2-25-14 | 25±0.5 | 34±0.8 | 39±1.0 | 14 | 2029 | 21 | 3043 | 42 | 6086 | 300 | 1.54 |
2-32-11 | 32±0.5 | 41±0.8 | 40±1.2 | 11 | 1594 | 16.5 | 2391 | 33 | 4782 | 420 | 1.82 |
2-38-12 | 38±0.7 | 47±0.8 | 52±1.2 | 10 | 1449 | 15 | 2174 | 30 | 4347 | 500 | 2.44 |
2-51-10 | 51±1 | 60±0.8 | 65±1.5 | 8个 | 1159 | 12 | 1789 | 24 | 3478 | 630 | 3.18 |
三层钢丝编织胶管技术参数
软件管理规范 | 内径 | 钢丝层直线 | 外径 | 工作压力 | 试验压力 | 爆破压力 | 最小弯曲半径 | 参考重量 | |||
海洋保护区 | 气压 | 兆帕 | 气压 | 兆帕 | 气压 | ||||||
3-5-72 | 5±0.5 | 13.2±0.6 | 17±0.8 | 72 | 10433 | 108 | 15649 | 180 | 26082 | 120 | 0.50 |
3-6-68 | 6±0.5 | 15.0±0.6 | 19±1.0 | 68 | 9853 | 102 | 14780 | 170 | 24633 | 140 | 0.56 |
3-8-54 | 8±0.5 | 17.5±0.6 | 22±1.0 | 54 | 7825 | 81 | 11737 | 120 | 17388 | 160 | 0.83 |
3-10-44 | 10±0.5 | 19.5±0.6 | 24±1.0 | 44 | 6376 | 66 | 9563 | 110 | 15939 | 180 | 0.95 |
3-13-32 | 13±0.5 | 23.5±0.8 | 28±1.2 | 32 | 4637 | 48岁 | 6955 | 96 | 13910 | 240 | 1.22 |
3-16-23 | 16±0.5 | 26.5±0.8 | 31±1.2 | 23 | 3333 | 34.5 | 4999 | 69 | 9998 | 300 | 1.30 |
3-19-20 | 19±0.5 | 29.5±0.8 | 34±1.2 | 20 | 2898 | 30 | 4347 | 60 | 8694 | 330 | 1.62 |
3-22-18 | 22±0.5 | 32.5±0.8 | 31±1.2 | 18 | 2608 | 27 | 3912 | 54 | 7825 | 380 | 1.81 |
3-25-16 | 25±0.5 | 36.0±0.8 | 41±1.0 | 16 | 2318 | 24 | 3478 | 48岁 | 6955 | 400 | 1.99 |
3-32-13 | 32±0.5 | 43.0±0.8 | 48±1.2 | 13 | 1884年 | 19.5 | 2826 | 39 | 5651 | 450 | 2.46 |
3-38-12 | 38±0.7 | 49.0±0.8 | 54±1.5 | 12 | 1789 | 18 | 2608 | 36 | 5216 | 500 | 3.08 |
3-51-12 | 51±1 | 62.0±0.8 | 67±1.5 | 10 | 1449 | 15 | 2174 | 30 | 4347 | 630 | 3.96 |
