Product DescriptionAccurate temperature control, excellent heat distribution
The temperature control module (D-TOP system) developed by has up to 12 stages of temperature control, and the step or linearity can be selected according to different product and process recipe heating modes, so that the repeatability and stability between batches of products are maximized well, the temperature can be controlled within ±0.5ºC.
Perfect pressure control, suitable for a variety of packaging forms
The pressure control module (D-TOP system) developed by continuously adjusts the pressure throughout the whole process to adapt the internal pressure changes of the product packaging, so that the degree of deformation of the product packaging is minimized, regardless of the rigid container of tin cans, aluminum cans or plastic bottles, plastic boxes or flexible containers can be easily satisfied, and the pressure can be controlled within ±0.05Bar.
Highly clean product packaging
The heat exchanger is used for indirect heating and cooling, so that the steam and cooling water are not in contact with the process water. The impurities in the steam and cooling water will not be brought to the sterilization retort, which avoids the secondary pollution of the product and does not require water treatment chemicals (No need to add chlorine), and the service life of the heat exchanger is also greatly extended.
Compliant with FDA/USDA certificate
TAIKANG has experienced thermal verification experts and is a member of IFTPS in the United States. It fully cooperates with FDA-approved third-party thermal verification agencies. The experience of many North American customers has made TAIKANG familiar with FDA/USDA regulatory requirements and cutting-edge sterilization technology.
Energy saving and environmental protection
A small amount of process water is quickly circulated to quickly reach the predetermined sterilization temperature.
Low noise, create a quiet and comfortable working environment.
Unlike pure steam sterilization, there is no need to vent before heating, which greatly saves steam loss and saves about 30% of steam.
Advantage
Compared with other disinfection form, UV sterilizer has the following advantages:
1,High efficient sterilization: normally kill 99%-99.9% bacteria within 1 to 2 seconds.
2, Broad spectrum: UV rays has broadest spectrum, can kill almost all bacteria and virus.
3, No secondary pollution: don't add any chemical agent, so cannot create secondary pollution to water and ambient environment, do not change any ingredients in water.
4, Safe and reliable to operate: traditional disinfection technology such as adopting chloride or ozone,whose disinfection agent itself are highly toxic and flammable material. While UV sterilizer has no such potential safety hazard .
5, Low maintenance fee: UV sterilizer occupies a small area, structure requirement is simple, so total investment is smaller. Lower in operation, it costs only half than that chlorine disinfection in kiloton water treatment.
