The feeding temperature is 30-35ºC, the sterilization temperature is 115-135ºC, the sterilization time is 4-6S, and the discharge temperature is 45-55ºC (cooled by tap water). The material in contact with the material is stainless steel 304, the inlet and outlet are ¢32, the sterilization temperature is automatically controlled, the temperature is less than the set temperature, the automatic return flow, the automatic discharge, the discharge temperature is manually controlled, and the feed is pumped by the buyer into the balance cylinder of the sterilizer , When the material is almost gone, the machine will alarm and prompt, so that the water is replenished or cleaned manually (Note: before starting the machine, the water is replaced by the material cycle by manual operation). After the cycle is completed, the switch is turned to automatic control.