CHINNOFI PHARMACEUTICAL MACHINERY CO., LTD.

1.Introduction
This series of products are mainly used for drying, sterilizing and pyrogen-removing the heat resistant articles such as penicillin bottles, aluminum caps, metal and glass vessels in the pharmaceutical industry.


2. TECHNICAL CHARACTERISTICS
The advanced technology can realize the dynamic 100-grade and superior temperature uniformity for the dry-heat sterilization ovens
* The machine-operated door adopts pneumatic open/close system which is safe and stabilized
* The machine-operated door adopts advanced vacuum-sealing method to ensure good seal, easy and practical operation of the door, effectively preventing the sterilized articles from being polluted.
* The H13-grade high temperature resistant high-efficiency filters are installed on all the air intake system, outlet system and cavity, and the filtering efficiency can reach 99.99% to ensure 100-grade in the cavity.
* The primary filter of cavity adopts innovative combination sealing technology1, to make the removal and repair easy while improving the product efficiency.
* The laminar board in the cavity adopts special pore distribution to control the level laminar air, so that the heat energy utilization rate and temperature uniformity are improved effectively.
* The equipment adopts advanced full automatic control system, therefore the temperature is controlled automatically and the positive pressure is obtained automatically in the inner cavity.
* The special temperature-over protection system can secure the equipment effectively.
* This product reserves the multi-function verification port and can perform the dust particle verification test and temperature distribution test.
* The various cooling type can improve the work efficiency.

3. ConSTRUCTION CHARACTERISTICS

* All the inner portion of the cavity which is possible to contact the article adopts the imported 316L stainless steel material.
* The outer surface adopts the imported 304 stainless steel material, and a new manufacturing technology is used to comply with GMP requirement and make the appearance more simple and beautiful.
* The special heat-insulating type is used to ensure the appearance temperature of products ≤ room temperature +15ºC.
* The inner cavity room is welded well by adopting TIG welding technology, the four corners of inner cavity adopt arc transition structure, and they can be cleaned easily without dead corner.

4. TECHNICAL PARAMETERS LIST

Product Model	Cavity Room Dimension (mm)			Overall Dimension (mm)			Heating Power (kw)	Maximum Amount of Circulating Air by Frequency Conversion Adjustment (m³/h)	Maximum Amount of Supplementary Air by Frequency Conversion Adjustment	Usage Amount of Cooling Water (kg/ batch)
	Width	Depth	Height	Width	Depth	Height
DMH-1	600	500	750	1700	850	1950	9	3800	426	150
DMH-2	800	800	1000	1900	1150	2100	15	4900	426	180
DMH-2A	900	900	1250	2100	1250	2300	19	5600	426	180
DMH-3	1000	1000	1200	2100	1350	2300	22	6800	504	200
DMH-3A	1000	1000	1500	2100	1350	2600	25	7400	504	220
DMH-4	1000	1200	1500	2100	1550	2600	28	8200	504	250
DMH-5	1000	1400	1450	2100	1750	2550	30	9800	504	300
DMH-5A	1000	1800	1400	2100	2150	2500	40	13600	702	350
DMH-6	1000	2150	1400	2100	2500	2600	45	14400	702	400
DMH-6A	1000	2500	1400	2100	2850	2500	50	14800	702	450
DMH-7	1100	2300	1600	2200	2650	2700	55	14800	702	550
DMH-8	2000	1800	1400	3100	2150	2500	70	20400	870	750
DMH-9	2000	2000	1500	3100	2350	2600	75	21600	870	850
DMH-10	2000	2650	1500	3100	3000	2600	90	22200	870	1000
DMH-11	2500	2650	1500	3600	3000	2600	110	27200	870	1150
DMH-12	2500	3000	1600	3600	3350	2700	130	29600	870	1350