Introduction:
*The whole machine is made of high-strength 304 stainless steel material sandblasting
*The use of high-quality nylon hair brush roller, after more than ten years of use certification, no hair loss, no fading, long service life.
*The brush arrangement is tight and moderate, the spacing is reasonable, the overall angle is scientific, the material as a whole is rotated in a drum type during the operation, the cleaning and peeling time is short, the effect is good, and the damage to the material is small.
*The brush fixing plate is a stainless steel plate as a whole, and the bearings on both sides are fixed, the operation is smooth, the noise is low, and the brush is easy to replace.
*Equipped with a separate stainless steel water connection board, uniformly collect and discharge wastewater, sediment, debris and other debris generated during the cleaning and peeling process to ensure the hygiene of the workshop.
*The equipment is equipped with a stainless steel spray pipe and is equipped with a valve, the amount of water can be adjusted; the bottom is equipped with movable castors, which can be moved according to the actual needs of the mobile device position.
*Equipped with an all-stainless steel manual sticker, it can effectively prevent the material from running out of the outlet during the production process.
Parameter:
| Model | BMD-200 Power:2.2KW |
| Size | 2100*937*890mm |
| Voltage | 380V 50Hz 3PH |
| Capacity | 300-800kg/h |
| Weight | 260KG |
